What should I pay attention to when using the vegetable chopper?

在餐飲行業中,每天供求人們飲食的需求量是非常大的,那么就要有很多菜品的供應,當菜運輸到餐廳的時候,是完整的,當然就需要把各種菜切成廚師們所需要的形狀,才能進行烹炒。那么大型切菜機就是一個很好的切菜機械,它真正方便了現在的餐飲業和各大需求地。

In the catering industry, the daily demand for people's diet is very large, so there must be a supply of many dishes. When the dishes are transported to the restaurant, they are complete. Of course, it is necessary to cut all kinds of dishes into the shape required by chefs before cooking. Then the vegetable cutting machine is a good vegetable cutting machine, which really facilitates the current catering industry and major demand places.

操作前的準備工作在使用切菜機之前,一定要先檢查一下設備和各零件是否完好無損,切菜的刀片夠不夠鋒利。主要的是它的線路是不是,因為在廚房里面使用,難免會遇到水,那么檢查好線路,以免造成套電的情況,以及人員上的傷亡。然后還要把切菜機的輸送帶和刀片用熱水進行清洗之后在使用。當完成這些之后,在把電源給打開,看看空轉是不是正常的。

Preparation before operation before using the vegetable cutter, be sure to check whether the equipment and parts are intact and whether the cutting blade is sharp enough. The most important thing is whether its line is safe, because it will inevitably encounter water when used in the kitchen. Then check the line to avoid setting electricity and casualties. Then wash the conveyor belt and blade of the vegetable cutter with hot water before use. When this is done, turn on the power and see if idling is normal.

切菜操作在操作之前,可以根據自己對菜的要求,來調節切菜機的粗細和所切出來的形狀功能。然后在把所需要切的菜放上去,打開電源,進行正常的切菜。但是要記住,千萬不能逆向操作,逆向的是非常危險的,然后把自己所切出來的菜,放在輸送帶上,進行的切制。

Before the operation of vegetable cutting, you can adjust the thickness and shape function of the vegetable cutting machine according to your own requirements for vegetables. Then put the vegetables to be cut on, turn on the power and cut the vegetables normally. But remember, do not reverse operation. Reverse operation is very dangerous. Then put your cut vegetables on the conveyor belt for final cutting.